POSCA Markør PC 3M Sort (6 enheder) Skriveartikler

Are you looking for fine and narrow Posca paint markers? You will find different colours in the range of Polyestershoppen. In our webshop, you will find everything to do with  Resin art & Art. The Posca 3M paint pens are ideal for finishing your Resin Art coasters, etagères, paintings or similar applications. The tip of this marker is very fine and narrow. The highlighter is therefore very suitable for small surfaces. The small tip allows very precise and detailed application. The pigment-based ink is water-based and odourless to use. Ask our staff for more information on the various Posca paint pens. We will be happy to help. Tip: are you looking for a paint marker with a thicker tip? Then take a look at the Posca markers (PC-8K). Applications Posca paint markers are equipped with a conical PC-3M tip. This means that the diameter of the tip gradually increases (conical). The conical tip makes this pen universally applicable. The tip has a line thickness of 0.9 to 1.3 millimetres and is very suitable for painting and drawing on various materials including epoxy. For example, you can use this pen to finish the edges of your painting, coaster or etagere.  Instructions for use You can use the Posca 3M paint markers using the following steps: Step 1: shake the markerShake the marker firmly upside down with the cap closed so that the ball can make the colour homogeneous. While shaking, you will hear that typical 'click'. Step 2: using and testing the markerStart by pressing the Posca marker several times with the tip on a sheet of paper until the tip is sufficiently soaked with paint. Test the coverage on a scrap sheet of paper: if the line is tight, the marker is ready. It can be useful to always have a rag handy to easily clean the tip or absorb excess paint. Step 3: shake againIf the coverage decreases while designing, shake the marker again. When doing this, make sure the cap is always on the marker to avoid paint splashes. You can then continue using the marker. Step 4: cleaningIf necessary, you can clean the tip with water as often as you like. If the tip has become extremely dry, you can also soak it in water overnight. Step 5: storageClose the cap of the Posca well. Store the Posca marker preferably horizontally. Tip: for a covering layer, apply several layers on top of each other. After the last coat, apply a layer of epoxy with a brush to 'seal'.   Product properties Type: PC-3MLine thickness: 0.9-1.3 mm (fine)Material: plasticColours: Black White Gold Silver Dark blue Red Yellow Dark green Light blue Pink More information about Posca? Would you like more information or advice on using Posca paint pens? No problem, we are happy to help and advise you! View the information centre for an answer to your question or contact us directly on +31 85 022 0090. Would you like to be helped immediately? Then send us a chat message. We are happy to help.

Tag tilbage til kontoret uden at glemme noget! Køb Markør POSCA PC-3M Sort (6 enheder), så bliver kollegaerne misundelige!Farve: SortEnheder: 6 enhederKarakteristika: Vandbaseret blækTykkelse: 0,9-1,3 mmTrikotage: KegleformetType: Markør